digital-logo
pioneer

PIONEER

PERFECT BINDER BOOK

PIONEER is a small perfect binder for books featuring the most sophisticated technology for using PUR adhesives as well as Hot Melt for the production of:

  • perfect bound soft cover books
  • sewn books with soft cover
  • book blocks for photo-books, also with photographic paper
  • book blocks with endpapers and lining for hard cover binding
Product Overview| Features| Video| Resources| Reviews

Product Overview


PIONEER

Off-Line

PIONEER is a small perfect binder for books featuring the most sophisticated technology for using PUR adhesives as well as Hot Melt for the production of:

  • perfect bound soft cover books
  • sewn books with soft cover
  • book blocks for photo-books, also with photographic paper
  • book blocks with endpapers and lining for hard cover binding

The machine with an automatic working cycle, offers computer controlled size changes which are performed automatically in a few seconds for easy operation as well as a closed and integrated glue application system (NPS PUR System patented) for simultaneous spine and side gluing.

pioneer-2-157x157
pioneer-4-1-157x157
pioneer-5-157x157

The small amount of glue in the tank (2 kg) allows a short start-up (approx. 13 minutes for glue heating) and limited energy consumption. As an indication, the capacity of the tank allows uninterrupted production of approx. 700 books of 10 mm thickness. (*)

Book covers (for thick covers pre-scoring is recommended) are placed individually by the operator at the register position. By entering the total width of the cover, the register pusher will automatically move to correct position to ensure perfect centering of the book block. With a symmetric cover, the center position will automatically be reached even when changing book thickness. When this mode of operation is selected, there will be no need of any manual adjustment to feed blocks with different thickness in sequence.

The sizes of the cover and book block (head-to-tail) must be entered by the operator. It is possible to control the start and stop of the glue application with micrometric adjustments. Side gluing can be selected between 0, 4 or 8 mm by means of a 3-way nozzle.

An air pressure control unit allows the operator to increase or reduce the quantity of glue and optimise consumption. After a few minutes of machine standstill, the glue nozzles close automatically to avoid spoilage of glue due to air exposure.

The milling-notching unit allows adequate spine preparation for any type of paper and thickness. Special knives mounted on the milling wheel are interchangeable and usable on 3 sides for long lasting operation. A mechanical adjustment allows the operator to change the level of feeding of the book block so that milling area can vary between 0 and 2 mm. In case of sewn books the milling station can be tilted away.

After milling/notching the book block is transported by the clamp in register position with the cover. In this station the spine and side glued areas are pressed. Depending on type and thickness of the cover, dwell time can be graduated between 0 and 20 seconds.

Upon completing the cycle, the clamp opens automatically and the operator can remove the book.

Book blocks for hard cover casing-in (option)

With PIONEER it is possible to automatically apply in one single pass two endpapers and the lining material to a book block, for hard cover book binding. The endpapers are pre-gathered with the book and before starting the movement of the clamp are lifted upwards. The side-gluing nozzles will apply glue on the two sides with a double line so that both book block and outside face of the endpapers will be glued simultaneously. Once registered with the spine, the endpapers are glued to the book and ready for the application of the lining strip which has been positioned by means of special guides onto the cover feeding station. After spine and side pressure, the book block can be removed by the operator.

A standard machine can work with PUR or Hot Melt glues. When both systems are required for frequent job (glue) changes, an additional unit (hot melt tank+ cleaner) can be factory-installed as an option.

Features


Video


Resources


 

 

Reviews for PIONEER


There are no reviews yet.

Be the First Person to review 'PIONEER'

 

Sign Up to Receive the Latest News